no 1583compatibility
This command disables OSPF 1583 compatibility.
Format
no 1583compatibility
Mode
Router OSPF Config
area default-cost (OSPF)
This command configures the default cost for the stub area. You must specify the area ID and
an integer value between 1-16777215.
Format
area <areaid> default-cost <1-16777215>
Mode
Router OSPF Config
area nssa (OSPF)
This command configures the specified areaid to function as an NSSA.
Format
area <areaid> nssa
Mode
Router OSPF Config
no area nssa
This command disables nssa from the specified area id.
Format
no area <areaid> nssa
Mode
Router OSPF Config
area nssa default-info-originate (OSPF)
This command configures the metric value and type for the default route advertised into the
NSSA. The optional metric parameter specifies the metric of the default route and is to be in
a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can
be comparable (nssa-external 1) or non-comparable (nssa-external 2).
Format
area <areaid> nssa default-info-originate [<metric>] [{comparable |
non-comparable}]
Mode
Router OSPF Config
ProSafe Managed Switch
Routing Commands
261