Interface Commands - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

Interface Commands

These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Command
interface
description
speed-duplex
negotiation
capabilities
flowcontrol
media-type
shutdown
switchport
broadcast
packet-rate
clear counters
show interfaces
status
show interfaces
counters
show interfaces
switchport
4-186
I
NTERFACE
Table 4-48 Interface Commands
Function
Configures an interface type and enters interface
configuration mode
Adds a description to an interface configuration IC
Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
Enables autonegotiation of a given interface
Advertises the capabilities of a given interface for
use in autonegotiation
Enables flow control on a given interface
Force port type selected for combination ports
Disables an interface
Configures the broadcast storm control
threshold
Clears statistics on an interface
Displays status for the specified interface
Displays statistics for the specified interfaces
Displays the administrative and operational
status of an interface
Mode Page
GC 4-187
4-187
IC 4-188
IC 4-189
IC 4-190
IC 4-191
IC 4-192
IC 4-193
IC 4-194
PE 4-195
NE, 4-196
PE
NE, 4-197
PE
NE, 4-199
PE