Device Designation Commands; Prompt; Table 4-8 Device Designation Commands - SMC Networks SMC8748ML3 Management Manual

Command Group Function
System Status
Frame Size

Device Designation Commands

Command

prompt

hostname
snmp-server
contact
snmp-server
location
switch renumber
prompt
This command customizes the CLI prompt. Use the no form to restore the
default prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
Default Setting
Console
Command Mode
Global Configuration
Table 4-7 System Management Commands (Continued)
Displays system configuration, active managers, and
version information
Enables support for jumbo frames

Table 4-8 Device Designation Commands

Function
Customizes the prompt used in PE and NE
mode
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
Renumbers stack units
S M
YSTEM ANAGEMENT
C
OMMANDS
Page
4-75
4-82
Mode Page
GC 4-33
GC 4-34
GC 4-142
GC 4-143
PE 4-34
4-33