SMC Networks SMC8748ML3 Management Manual page 128

Gigabit ethernet switch

Hide thumbs Also See for SMC8748ML3:

Table of Contents

ONFIGURING THE

Command Attributes

• User Name – The name of user connecting to the SNMP agent.

(Range: 1-32 characters)

• Group Name – The name of the SNMP group to which the user is

assigned. (Range: 1-32 characters)

• Engine ID – The engine identifier for the SNMP agent on the remote

device where the remote user resides. Note that the remote engine

identifier must be specified before you configure a remote user. (See

"Specifying a Remote Engine ID" on page 3-59.)

• Remote IP – The Internet address of the remote device where the user

• Security Model – The user security model; SNMP v1, v2c or v3.

(Default: v1)

• Security Level – The security level used for the user:

- noAuthNoPriv – There is no authentication or encryption used in

SNMP communications. (This is the default for SNMPv3.)

- AuthNoPriv – SNMP communications use authentication, but the

data is not encrypted (only available for the SNMPv3 security model).

- AuthPriv – SNMP communications use both authentication and

encryption (only available for the SNMPv3 security model).

• Authentication Protocol – The method used for user authentication.

(Options: MD5, SHA; Default: MD5)

• Authentication Password – A minimum of eight plain text characters

is required.

• Privacy Protocol – The encryption algorithm use for data privacy; only

56-bit DES is currently available.

• Privacy Password – A minimum of eight plain text characters is