Dhcp Relay; Ip Dhcp Restart Relay; Table 4-44 Dhcp Relay Commands - SMC Networks SMC8748ML3 Management Manual

Example
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart client
Console#show ip interface
Vlan 1 is up, addressing mode is DHCP
Interface address is 192.168.1.54, mask is 255.255.255.0, Primary
MTU is 1500 bytes
Proxy ARP is disabled
Split horizon is enabled
Console#
Related Commands
ip address (4-308)

DHCP Relay

Command
ip dhcp restart relay Enables DHCP relay agent
ip dhcp relay server Specifies DHCP server addresses for relay

ip dhcp restart relay

This command enables DHCP relay for the specified VLAN. Use the no
form to disable it.
Syntax
[no] ip dhcp relay
Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)

Table 4-44 DHCP Relay Commands

Function
DHCP C
OMMANDS
Mode Page
IC 4-159
IC 4-160
4-159