Show Ip Ospf Neighbor - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
Table 4-97 show ip ospf interface - display description (Continued)
Field
State
Priority
Designated Router
Backup Designated
Router
Timer intervals

show ip ospf neighbor

This command displays information about neighboring routers on each
interface within an OSPF area.
Syntax
show ip ospf neighbor
Command Mode
Privileged Exec
Example
Console#show ip ospf neighbor
ID
--------------- ------ ---------------- ---------------
10.1.1.252
Console#
4-376
I
NTERFACE
Description
• Disabled – OSPF not enabled on this interface
• Down – OSPF is enabled on this interface, but interface is
down
• Loopback – This is a loopback interface
• Waiting – Router is trying to find the DR and BDR
• DR – Designated Router
• BDR – Backup Designated Router
• DRother – Interface is on a multiaccess network, but is not
the DR or BDR
Router priority
Designated router ID and respective interface address
Backup designated router ID and respective interface address
Configuration settings for timer intervals, including Hello,
Dead and Retransmit
Pri
1
State
FULL/DR
Address
10.1.1.252