Configuring Snmpv3 Users; Figure 3-29 Setting An Engine Id - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
The engine ID can be specified by entering 1 to 26 hexadecimal characters.
If less than 26 characters are specified, trailing zeroes are added to the
value. For example, the value "1234" is equivalent to "1234" followed by
22 zeroes.
Web – Click SNMP, SNMPv3, Remote Engine ID. Enter an ID of up to
26 hexadecimal characters and then click Save.
CLI – This example specifies a remote SNMPv3 engine ID.
Console(config)#snmp-server engineID remote 54321 192.168.1.19
Console(config)#exit
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID
80000000030004e2b316c54321
Console#

Configuring SNMPv3 Users

Each SNMPv3 user is defined by a unique name. Users must be configured
with a specific security level and assigned to a group. The SNMPv3 group
restricts users to a specific read and a write view.
Command Attributes
• User Name – The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
• Group Name – The name of the SNMP group to which the user is
assigned. (Range: 1-32 characters)
• Security Model – The user security model; SNMP v1, v2c or v3.
3-60
S
WITCH

Figure 3-29 Setting an Engine ID

4-147
4-149
IP address
192.168.1.19