Table 3-3 Logging Levels - SMC Networks SMC8748ML3 Management Manual

Command Attributes
• System Log Status – Enables/disables the logging of debug or error
messages to the logging process. (Default: Enabled)
• Flash Level – Limits log messages saved to the switch's permanent flash
memory for all levels up to the specified level. For example, if level 3 is
specified, all messages from level 0 to level 3 will be logged to flash.
(Range: 0-7, Default: 3)
Level Severity Name
7 Debug
6 Informational
5 Notice
4 Warning
3 Error
2 Critical
1 Alert
0 Emergency
* There are only Level 2, 5 and 6 error messages for the current firmware release.
• RAM Level – Limits log messages saved to the switch's temporary RAM
memory for all levels up to the specified level. For example, if level 7 is
specified, all messages from level 0 to level 7 will be logged to RAM.
(Range: 0-7, Default: 7)
Note:The Flash Level must be equal to or less than the RAM Level.

Table 3-3 Logging Levels

Description
Debugging messages
Informational messages only
Normal but significant condition, such as cold start
Warning conditions (e.g., return false, unexpected
return)
Error conditions (e.g., invalid input, default used)
Critical conditions (e.g., memory allocation, or free
memory error - resource exhausted)
Immediate action needed
System unusable
B C
ASIC ONFIGURATION
3-39