Spanning-Tree Transmission-Limit; Spanning-Tree Mst-Configuration - SMC Networks SMC8748ML3 Management Manual

spanning-tree transmission-limit

This command configures the minimum interval between the transmission
of consecutive RSTP/MSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#

spanning-tree mst-configuration

This command changes to Multiple Spanning Tree (MST) configuration
mode.
Default Setting
• No VLANs are mapped to any MST instance.
• The region name is set the switch's MAC address.
Command Mode
Global Configuration
Example
Console(config)#spanning-tree mst-configuration
Console(config-mstp)#
S T
PANNING REE
C
OMMANDS
4-229