User Authentication - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
CLI – Use the snmp-server view command to configure a new view. This
example view includes the MIB-2 interfaces table, and the wildcard mask
selects all index entries.
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.*
included
Console(config)#exit
Console#show snmp view
View Name: ifEntry.a
Subtree OID: 1.3.6.1.2.1.2.2.1.1.*
View Type: included
Storage Type: nonvolatile
Row Status: active
View Name: readaccess
Subtree OID: 1.3.6.1.2
View Type: included
Storage Type: nonvolatile
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: nonvolatile
Row Status: active
Console#

User Authentication

You can restrict management access to this switch and provide secure
network access using the following options:
• User Accounts – Manually configure management access rights for
users.
• Authentication Settings – Use remote authentication to configure access
rights.
• HTTPS Settings – Provide a secure web connection.
• SSH Settings – Provide a secure shell (for secure Telnet access).
• Port Security – Configure secure addresses for individual ports.
• 802.1X – Use IEEE 802.1X port authentication to control access to
specific ports.
• IP Filter – Filters management access to the web, SNMP or Telnet
interface.
3-74
S
WITCH
4-150
4-151