Table 4-101 Router Redundancy Commands; Show Vrrp Interface Counters - SMC Networks SMC8748ML3 Management Manual

show vrrp interface counters

This command displays counters for VRRP protocol events and errors that
have occurred for the specified group and interface.
show vrrp group interface vlan interface counters
• group - Identifies a VRRP group. (Range: 1-255)
• interface - Identifier of configured VLAN interface. (Range: 1-4093)
Defaults
None
Command Mode
Privileged Exec
Example
Console#show vrrp 1 interface vlan 1 counters
Total Number of Times Transitioned to MASTER
Total Number of Received Advertisements Packets
Total Number of Received Error Advertisement Interval Packets
Total Number of Received Authentication Failures Packets
Total Number of Received Error IP TTL VRRP Packets
Total Number of Received Priority 0 VRRP Packets
Total Number of Sent Priority 0 VRRP Packets
Total Number of Received Invalid Type VRRP Packets
Total Number of Received Error Address List VRRP Packets
Total Number of Received Invalid Authentication Type VRRP Packets
Total Number of Received Mismatch Authentication Type VRRP Packets : 0
Total Number of Received Error Packet Length VRRP Packets
Console#
* Refer to "Displaying VRRP Group Statistics" on page 3-263 for a description of
the display items.
clear vrrp router counters
This command clears VRRP system statistics.
Command Mode
Privileged Exec
Example
Console#clear vrrp router counters
Console#
R R
OUTER EDUNDANCY
C
OMMANDS
: 6
: 0
: 0
: 0
: 0
: 0
: 5
: 0
: 0
: 0
: 0
4-391