Reload; End - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
The ! command repeats commands from the Execution command history
buffer when you are in Normal Exec or Privileged Exec Mode, and
commands from the Configuration command history buffer when you are in
any of the configuration modes. In this example, the !2 command repeats the
second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#

reload

This command restarts the system.
Note: When the system is restarted, it will always run the Power-On
Self-Test. It will also retain all configuration information stored in
non-volatile memory by the copy running-config startup-config
command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
Console#reload
System will be restarted, continue <y/n>? y

end

This command returns to Privileged Exec mode.
Default Setting
None
4-30
I
NTERFACE