Table 3-22 Rip Information And Statistics - SMC Networks SMC8748ML3 Management Manual

Table 3-22 RIP Information and Statistics

Parameter
Globals
RIP Routing Process
Update Time in Seconds
Number of Route Changes Number of times routing information has changed.
Number of Queries
Interface Information
Interface
SendMode
ReceiveMode
InstabilityPreventing
AuthType
RcvBadPackets
RcvBadRoutes
SendUpdates
Peer Information
PeerAddress
UpdateTime
Version
RcvBadPackets
RcvBadRoutes
Description
Indicates if RIP has been enabled or disabled.
The interval at which RIP advertises known route
information. (Default: 30 seconds)
Number of router database queries received by this
router.
IP address of the interface.
RIP version sent on this interface (none, RIPv1,
RIPv2, rip1Compatible).
RIP version received on this interface (none, RIPv1,
RIPv2, RIPv1Orv2).
Shows if split-horizon, poison-reverse, or no
instability prevention method is in use.
Shows if authentication is set to simple password or
none.
Number of bad RIP packets received.
Number of bad routes received.
Number of route changes.
IP address of a neighboring RIP router.
Last time a route update was received from this peer.
Whether RIPv1 or RIPv2 packets were received from
this peer.
Number of bad RIP packets received from this peer.
Number of bad routes received from this peer.
IP R
OUTING
3-301