Show Map Ip Dscp; Table 4-66 Priority Commands - SMC Networks SMC8748ML3 Management Manual

Example
Console#show map ip precedence ethernet 1/5
Precedence mapping status: disabled
Port
--------- ---------- ---
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Eth 1/ 5
Console#
Related Commands
map ip precedence (Global Configuration) (4-278)
map ip precedence (Interface Configuration) (4-278)

show map ip dscp

This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-25/49)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Precedence COS
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
P C
RIORITY OMMANDS
4-283