Tacacs+ Client; Tacacs-Server Host; Table 4-30 Tacacs+ Client Commands - SMC Networks SMC8748ML3 Management Manual

TACACS+ Client

Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to
control access to TACACS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.
Command

tacacs-server host

tacacs-server port
tacacs-server key
show tacacs-server
tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore
the default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
10.11.12.13
Command Mode
Global Configuration
Example
Console(config)#tacacs-server host 192.168.1.25
Console(config)#

Table 4-30 TACACS+ Client Commands

Function
Specifies the TACACS+ server
Specifies the TACACS+ server network port
Sets the TACACS+ encryption key
Shows the current TACACS+ settings
A
UTHENTICATION
C
OMMANDS
Mode Page
GC 4-99
GC 4-100
GC 4-100
GC 4-101
4-99