Show Ip Ospf; Table 4-88 Show Ip Ospf - Display Description - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

show ip ospf

This command shows basic information about the routing configuration.
Command Mode
Privileged Exec
Example
Console#show ip ospf
Routing Process with ID 10.1.1.253
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Redistributing External Routes from,
rip with metric mapped to 10
Number of area in this router is 2
Area 0.0.0.0 (BACKBONE)
Number of interfaces in this area is 1
SPF algorithm executed 19 times
Area 10.1.0.0
Number of interfaces in this area is 4
SPF algorithm executed 19 times
Console#
Field
Routing Process with ID
Supports only single TOS
(TOS0) route
It is an router type
Number of areas in this router
Area identifier
Number of interfaces
SPF algorithm executed
4-364
I
NTERFACE

Table 4-88 show ip ospf - display description

Description
Router ID
Type of service is not supported, so you can only
assign one cost per interface
The types displayed include internal, area border,
or autonomous system boundary routers
The number of configured areas
The area address, and area type if backbone, NSSA
or stub
The number of interfaces attached to this area
The number of times the shortest path first
algorithm has been executed for this area