User Access Commands; Username; Table 4-9 User Access Commands - SMC Networks SMC8748ML3 Management Manual

Example
This example shows how to renumber all units.
Console#switch all renumber
Console#

User Access Commands

The basic commands required for management access are listed in this
section. This switch also includes other options for password checking via
the console or a Telnet connection (page 4-14), user authentication via a
remote authentication server (page 4-91), and host access authentication for
specific ports (page 4-104).
Command

username

enable password
username
This command adds named users, requires authentication at login, specifies
or changes a user's password (or specify that no password is required), or
specifies or changes a user's access level. Use the no form to remove a user
name.
Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
• name - The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
• access-level level - Specifies the user level.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec.
• nopassword - No password is required for this user to log in.

Table 4-9 User Access Commands

Function
Establishes a user name-based authentication
system at login
Sets a password to control access to the
Privileged Exec level
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-35
GC 4-37
4-35