Dhcp Server; Table 4-45 Dhcp Server Commands - SMC Networks SMC8748ML3 Management Manual

Command Mode
Interface Configuration (VLAN)
Usage Guidelines
• You must specify the IP address for at least one DHCP server.
Otherwise, the switch's DHCP relay agent will not forward client
requests to a DHCP server.
• To start DHCP relay service, enter the ip dhcp restart relay command.
Example
Console(config)#interface vlan 1
Console(config-if)#ip dhcp relay server 10.1.0.99
Console(config-if)#
Related Commands
ip dhcp restart relay (4-159)

DHCP Server

Command
service dhcp
ip dhcp
excluded-address
ip dhcp pool
network
default-router
domain-name
dns-server
next-server
bootfile

Table 4-45 DHCP Server Commands

Function
Enables the DHCP server feature on this
switch
Specifies IP addresses that a DHCP server
should not assign to DHCP clients
Configures a DHCP address pool on a
DHCP Server
Configures the subnet number and mask for
a DHCP address pool
Specifies the default router list for a DHCP
client
Specifies the domain name for a DHCP client DC
Specifies the Domain Name Server (DNS)
servers available to a DHCP client
Configures the next server in the boot
process of a DHCP client
Specifies a default boot image for a DHCP
client
DHCP C
OMMANDS
Mode Page
GC 4-162
GC 4-163
GC 4-163
DC 4-164
DC 4-165
4-166
DC 4-167
DC 4-167
DC 4-168
4-161