Sntp Client - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
Command
show sntp
clock timezone
calendar set
show calendar

sntp client

This command enables SNTP client requests for time synchronization from
NTP or SNTP time servers specified with the sntp servers command. Use
the no form to disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the switch only records the time
starting from the factory default set at the last bootup (i.e., 00:00:00, Jan.
1, 2001).
• This command enables client time requests to time servers specified via
the sntp servers command. It issues time synchronization requests
based on the interval set via the sntp poll command.
4-70
I
NTERFACE
Table 4-22 Time Commands (Continued)
Function
Shows current SNTP configuration settings
Sets the time zone for the switch's internal clock
Sets the system date and time
Displays the current date and time setting
Mode Page
NE, 4-73
PE
GC 4-73
PE 4-74
NE, 4-75
PE