Displaying Switch Hardware/Software Versions - SMC Networks SMC8748ML3 Management Manual

CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Ted
Console(config)#exit
Console#show system
System description: SMC8724ML3 L3 GE Switch
System OID string: 1.3.6.1.4.1.202.20.45
System information
System Up time:
seconds
System Name:
System Location:
System Contact:
MAC address (unit1):
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server:
Telnet server port:
Authentication login:
Jumbo Frame:
POST result
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Crossbar Int Loopback Test ... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in ports.
• Hardware Version – Hardware version of the main board.
0 days, 1 hours, 28 minutes, and 0.51
R&D 5
WC 9
Ted
00-30-F1-D4-73-A0
enabled
80
enabled
443
enable
23
local RADIUS none
Disabled
B C
ASIC ONFIGURATION
4-34
4-143
4-142
4-80
3-17