Table 4-19 Show Logging Flash/Ram - Display Description - SMC Networks SMC8748ML3 Management Manual

• sendmail - Displays settings for the SMTP event handler (page 4-69).
• trap - Displays settings for the trap function.
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), and the message
level for RAM is "debugging" (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#

Table 4-19 show logging flash/ram - display description

Field
Syslog logging
History logging
in FLASH
History logging
in RAM
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type:
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Enabled
Enabled
Description
Shows if system logging has been enabled via the logging on
command.
The message level(s) reported based on the logging history
command.
The message level(s) reported based on the logging history
command.
Debugging messages
S M
YSTEM ANAGEMENT
C
OMMANDS
4-63