Figure 3-17 System Logs - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
Web – Click System, Logs, System Logs. Specify System Log Status, set the
level of event messages to be logged to RAM and flash memory, then click
Apply.
CLI – Enable system logging and then specify the level of messages to be
logged to RAM and flash memory. Use the show logging command to
display the current settings.
Console(config)#logging on
Console(config)#logging history ram 0
Console(config)#
Console#show logging ram
Syslog logging:
History logging in RAM: level emergencies
Console#
3-40
S
WITCH

Figure 3-17 System Logs

Disabled
4-58
4-58
4-62