Show Ip Traffic - SMC Networks SMC8748ML3 Management Manual

show ip traffic

This command displays statistics for IP, ICMP, UDP, TCP and ARP
protocols.
Command Mode
Privileged Exec
Command Usage
For a description of the information shown by this command, see
"Displaying Statistics for IP Protocols" on page 3-282.
Example
Console#show ip traffic
IP statistics:
Rcvd:
Frags: 0 reassembled, 0 timeouts
Sent:
ICMP statistics:
Rcvd: 0 checksum errors, 0 redirects, 0 unreachable, 0 echo
Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply
UDP statistics:
Rcvd: 0 total, 0 checksum errors, 0 no port
Sent: 0 total
TCP statistics:
Rcvd: 0 total, 0 checksum errors
Sent: 0 total
ARP statistics:
Rcvd: 0 requests, 1 replies
Sent: 1 requests, 0 replies
Console#
5 total, 5 local destination
0 checksum errors
0 unknown protocol, 0 not a gateway
0 fragmented, 0 couldn't fragment
9 generated
0 no route
5 echo reply, 0 mask requests, 0 mask replies, 0 quench
0 parameter, 0 timestamp
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 time exceeded, 0 parameter problem
IP R C
OUTING OMMANDS
4-323