Snmp-Server; Show Snmp - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
Command
show snmp group
snmp-server user
show snmp user

snmp-server

This command enables the SNMPv3 engine and services for all management
clients (i.e., versions 1, 2c, 3). Use the no form to disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#snmp-server
Console(config)#

show snmp

This command can be used to check the status of SNMP communications.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command provides information on the community access strings,
counter information for SNMP input and output protocol data units, and
whether or not SNMP logging has been enabled with the snmp-server
enable traps command.
4-140
I
NTERFACE
Table 4-37 SNMP Commands (Continued)
Function
Shows the SNMP groups
Adds a user to an SNMP group
Shows the SNMP users
Mode Page
PE 4-153
GC 4-154
PE 4-156