Mirror Port Commands; Table 4-50 Mirror Port Commands; Table 4-49 Show Interfaces Switchport - Display Description - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

Table 4-49 show interfaces switchport - display description

Field
Broadcast threshold
LACP status
Ingress/Egress rate
limit
VLAN membership
mode
Ingress rule
Acceptable frame
type
Native VLAN
Priority for untagged
traffic
GVRP status
Allowed VLAN
Forbidden VLAN

Mirror Port Commands

This section describes how to mirror traffic from a source port to a target
port.
Command
port monitor
show port monitor Shows the configuration for a mirror port
4-200
I
NTERFACE
Description
Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (page 4-194).
Shows if Link Aggregation Control Protocol has been enabled
or disabled (page 4-206).
Shows if rate limiting is enabled, and the current rate limit
(page 4-203).
Indicates membership mode as Trunk or Hybrid
(page 4-250).
Shows if ingress filtering is enabled or disabled (page 4-252).
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-251).
Indicates the default Port VLAN ID (page 4-253).
Indicates the default priority for untagged frames
(page 4-269).
Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-266).
Shows the VLANs this interface has joined, where "(u)"
indicates untagged and "(t)" indicates tagged (page 4-254).
Shows the VLANs this interface can not dynamically join via
GVRP (page 4-255).

Table 4-50 Mirror Port Commands

Function
Configures a mirror session
Mode Page
IC 4-201
PE 4-202