Ip Dhcp Excluded-Address; Ip Dhcp Pool - SMC Networks SMC8748ML3 Management Manual

Command Usage
If the DHCP server is running, you must restart it to implement any
configuration changes.
Example
Console(config)#service dhcp
Console(config)#

ip dhcp excluded-address

This command specifies IP addresses that the DHCP server should not
assign to DHCP clients. Use the no form to remove the excluded IP
addresses.
Syntax
[no] ip dhcp excluded-address low-address [high-address]
• low-address - An excluded IP address, or the first IP address in an
excluded address range.
• high-address - The last IP address in an excluded address range.
Default Setting
All IP pool addresses may be assigned.
Command Mode
Global Configuration
Example
Console(config)#ip dhcp excluded-address 10.1.0.19
Console(config)#

ip dhcp pool

This command configures a DHCP address pool and enter DHCP Pool
Configuration mode. Use the no form to remove the address pool.
Syntax
[no] ip dhcp pool name
name - A string or integer. (Range: 1-8 characters)
DHCP C
OMMANDS
4-163