Logging Sendmail Host; Logging Sendmail Level; Table 4-21 Smtp Alert Commands - SMC Networks SMC8748ML3 Management Manual

Example
The following example shows the event message stored in RAM.
Console#show log ram
[1] 00:01:30 2001-01-01
"VLAN 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
[0] 00:01:30 2001-01-01
"Unit 1, Port
level: 6, module: 5, function: 1, and event no.: 1
Console#
SMTP Alert Commands
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
Command
logging sendmail host SMTP servers to receive alert messages
logging sendmail
level
logging sendmail
source-email
logging sendmail
destination-email
logging sendmail
show logging
sendmail

logging sendmail host

This command specifies SMTP servers that will be sent alert messages. Use
the no form to remove an SMTP server.
Syntax
[no] logging sendmail host ip_address
ip_address - IP address of an SMTP server that will be sent alert
messages for event handling.
1 link-up notification."

Table 4-21 SMTP Alert Commands

Function
Severity threshold used to trigger alert
messages
Email address used for "From" field of alert
messages
Email recipients of alert messages
Enables SMTP event handling
Displays SMTP event handler settings
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-65
GC 4-66
GC 4-67
GC 4-68
GC 4-68
NE, 4-69
PE
4-65