Statically Configuring A Trunk - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
• The ports at both ends of a connection must be configured as trunk
ports.
• When configuring static trunks on switches of different types, they must
be compatible with the Cisco EtherChannel standard.
• The ports at both ends of a trunk must be configured in an identical
manner, including communication mode (i.e., speed and duplex mode),
VLAN assignments, and CoS settings.
• Any of the Gigabit ports on the front panel can be trunked together,
including ports of different media types.
• All the ports in a trunk have to be treated as a whole when moved from/
to, added or deleted from a VLAN.
• STP, VLAN, and IGMP settings can only be made for the entire trunk.

Statically Configuring a Trunk

Command Usage
• When configuring static trunks, you
may not be able to link switches of
different types, depending on the
manufacturer's implementation.
However, note that the static trunks
on this switch are Cisco
EtherChannel compatible.
• To avoid creating a loop in the
network, be sure you add a static
trunk via the configuration interface
before connecting the ports, and also disconnect the ports before
removing a static trunk via the configuration interface.
3-126
S
WITCH
statically
configured
active
links