Figure 3-51 Acl Mask Configuration - Mac - SMC Networks SMC8748ML3 Management Manual

Gigabit ethernet switch

Hide thumbs Also See for SMC8748ML3:

Table of Contents

ONFIGURING THE

Web – Configure the mask to match the required rules in the MAC ingress

or egress ACLs. Set the mask to check for any source or destination

address, a host address, or an address range. Use a bitmask to search for

specific VLAN ID(s) or Ethernet type(s). Or check for rules where a

packet format was specified. Then click Add.

Figure 3-51 ACL Mask Configuration - MAC

Do you have a question about the SMC8748ML3 and is the answer not in the manual?