Multicast Filtering Commands; Table 4-73 Multicast Filtering Commands; Table 4-74 Igmp Snooping Commands - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to query for
any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data out
to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to receive
the multicast service.
Command Groups
IGMP Snooping
IGMP Query (Layer 2) Configures IGMP query parameters for multicast
Static Multicast
Routing
IGMP Snooping Commands
Command
ip igmp snooping
ip igmp snooping
vlan static
ip igmp snooping
version
show ip igmp
snooping
show
mac-address-table
multicast
4-296
I
NTERFACE

Table 4-73 Multicast Filtering Commands

Function
Configures multicast groups via IGMP snooping or
static assignment, sets the IGMP version, displays
current snooping and query settings, and displays the
multicast service and group members
filtering at Layer 2
Configures static multicast router ports

Table 4-74 IGMP Snooping Commands

Function
Enables IGMP snooping
Adds an interface as a member of a multicast
group
Configures the IGMP version for snooping
Shows the IGMP snooping and query
configuration
Shows the IGMP snooping MAC multicast
list
Page
4-296
4-300
4-305
Mode Page
GC 4-297
GC 4-297
GC 4-298
PE 4-299
PE 4-299