Table 4-2 Configuration Command Modes - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode
Line
Access
Control
List
DHCP
Interface
VLAN
MSTP
Router
Class Map class map
Policy Map policy map
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
. .
.
Console(config-if)#exit
Console(config)#
4-10
I
NTERFACE

Table 4-2 Configuration Command Modes

Command
line {console | vty}
access-list ip standard
access-list ip extended
access-list ip mask-precedence
access-list mac
access-list mac mask-precedence
ip dhcp pool
interface {ethernet port |
port-channel id| vlan id}
vlan database
spanning-tree mst-configuration Console(config-mstp)#
router {rip | ospf}
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
Console(config-dhcp)
Console(config-if)#
Console(config-vlan)
Console(config-router)
Console(config-cmap)
Console(config-pmap)
Page
4-14
4-114
4-157
4-186
4-245
4-229
4-325
4-340
4-286
4-289