Show Startup-Config - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE

show startup-config

This command displays the configuration file stored in non-volatile memory
that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by "!" symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
- MAC address for each switch in the stack
- SNTP server settings
- SNMP community strings
- Users (names and access levels)
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- Multiple spanning tree instances (name and interfaces)
- IP address configured for VLANs
- Routing protocol configuration settings
- Spanning tree settings
- Any configured settings for the console port and Telnet
4-76
I
NTERFACE