Interface Commands; Table 4-43 Snmp User - SMC Networks 6824MPE INT Management Manual

Field
EngineId
User Name
Authentication
Protocol
Privacy Protocol
Storage Type
Row Status

Interface Commands

These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Command
interface
description
speed-duplex
negotiation
capabilities
flowcontrol
shutdown
switchport
broadcast
packet-rate
clear counters
show interfaces
status

Table 4-43 SNMP User

Description
String identifying the engine ID.
Name of user connecting to the SNMP agent.
The authentication protocol used with SNMPv3.
The privacy protocol used with SNMPv3.
The storage type for this entry.
The row status of this entry.
Table 4-44 Interface Commands
Function
Configures an interface type and enters interface
configuration mode
Adds a description to an interface configuration IC
Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
Enables autonegotiation of a given interface
Advertises the capabilities of a given interface for
use in autonegotiation
Enables flow control on a given interface
Disables an interface
Configures broadcast storm control
Clears the statistics on a given interface
Displays status for the specified interface
I C
NTERFACE OMMANDS
Mode Page
GC
IC
IC
IC
IC
IC
IC
PE
NE,
PE
4-174
4-175
4-175
4-177
4-178
4-179
4-180
4-181
4-182
4-183
4-173