Changing Options For Rf Planning; Configuring The Typical Client's Transmit Power; Changing Colors - 3Com WX1200 Reference Manual

Changing Options
for RF Planning
Configuring the
Typical Client's
Transmit Power

Changing Colors

To clear this option, clear Always accept self-signed certificates. By
default, this option is disabled. The 3WXM client accepts a certificate only
if the certificate is signed by a certificate authority (CA).
4 Click Close to close the Preferences dialog box, or click another tab to
continue making changes.
You can change the following RF planning options:
Typical transmit power for clients in the 3Com network.
Color schemes for showing RF information
To change the typical client's transmit power:
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the RF tab.
3 In the Typical Client Tx Power box, specify the typical transmit power
(1 to 20 dBm) for clients in the network. The default is 13 dBm, which is
a common client transmit power.
If you want to choose the color for an RF technology or obstacle, see
"Changing Colors".
You can change the color schemes for showing the following types of RF
information:
802.11a channels
802.11b and 802.11g channels
RF obstacles
Radio transmit data rates
Receive signal strength (RSSI)
Signal-to-noise ratio (SNR)
Client load (number of clients associated with a radio)
Probability of a rogue device or client being in a specific location

Changing Options for RF Planning

487