Dldp Work-Mode - 3Com Switch 4500 Family Manual

Parameters
auto: Disables automatically the corresponding port when DLDP detects an unidirectional link or finds
in the enhanced mode that the peer port is down.
manual: Generates log and traps and prompts the user to disable manually the corresponding port
when DLDP detects an unidirectional link or finds in the enhanced mode that the peer port is down. After
the port is disabled, it stops sending and receiving DLDP packets.
Description
Use the dldp unidirectional-shutdown command to set the DLDP handling mode after a unidirectional
link is found.
Use the undo dldp unidirectional-shutdown command to restore the default DLDP handling mode
after a unidirectional link is found.
By default, the DLDP handling mode after a unidirectional link is found is auto.
Related commands: dldp work-mode.
Examples
# Configure DLDP to automatically disable the corresponding port when a unidirectional link is found.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dldp unidirectional-shutdown auto

dldp work-mode

Syntax
dldp work-mode { enhance | normal }
undo dldp work-mode
View
System view
Parameters
enhance: Configures DLDP to work in enhanced mode. In this mode, DLDP detects whether neighbors
exist when neighbor tables are aging.
normal: Configures DLDP to work in normal mode. In this mode, DLDP does not detect whether
neighbors exist when neighbor tables are aging.
Description
Use the dldp work-mode command to set the DLDP operating mode.
Use the undo dldp work-mode command to restore the default DLDP operating mode.
By default, DLDP works in normal mode.
1-6