Configuring User Login Password In Encryption Mode; Configuring Login Attempts Limitation And Failure Procession Mode - 3Com Switch 4500 26-Port Configuration Manual

344 C 20: P
HAPTER ASSWORD
Configuring User Login
Password in Encryption
Mode
Configuring Login
Attempts Limitation and
Failure Procession Mode
C C O
ONTROL ONFIGURATION PERATIONS
CAUTION: When updating a password, do not reuse one of the recorded history
passwords, or else, the system will give a prompt to reset a password.
The system administrator can perform the following operations to manually
remove history password records.
Table 372 Remove History Password Records Manually
Operation
Enter system view
Remove history password
records of one or all users
Remove history records of one
or all super passwords
Table 373 Configure User Login Password in Encryption Mode
Operation
Enter system view
Enter the specified user view
Configure a user login
password in encryption mode
Table 374 Configure Login Attempts Limitation and Failure Procession Mode
Operation
Enter system view
Enable the login attempts
limitation, configure the
maximum login attempt times
and configure the procession
mode used when the
maximum attempt times is
exceeded.
Command
system-view
reset
password-control
history-record [
username username ]
reset
password-control
history-record
super [ level
level-value ]
Command
system-view
local-user username
password
Command
system-view
password-control
login-attempt
login-times [
exceed { lock |
unlock | locktime
time } ]
Description
Executing this command without
the username username option
will remove the history password
records of all users.
Executing this command with the
username username option will
remove the history password
records of the specified user.
Executing this command without
the level level-value option will
remove the history records of all
super passwords.
Executing this command with the
level level-value option will
remove the history records of the
super password for the users at
the specified level.
Description
Input a password at the
prompt of the system and
ensure the two inputs are
consistent.
Description
By default, the maximum
attempt times is three, and the
switch operates in the locktime
procession mode for the users
that exceed the maximum times.