Connecting the ZEN and Communications Settings
3-1
Connecting the ZEN and Communications
Settings
3-1-1
Connecting to the ZEN
Note The connector on the computer side of the ZEN-CIF01 Computer
42
Use a ZEN-CIF01 Computer Connecting Cable to connect the ZEN
and a serial port (COM port) of the computer.
Connecting Cable is a 9-pin D-sub connector. When connecting
to a computer that does not have a serial port, connect an RS-
232C-USB Conversion Cable to the ZEN-CIF01 Computer
Connecting Cable. An OMRON CS1W-CIF31 Conversion Cable
can be used (cable length: 50 cm).
ZEN-CIF01 Computer
Connecting Cable
Section 3-1