Connecting To The Initial Step With A Jump (Or Loop) - Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual

Editing the SFC Chart
3-2-10

Connecting to the Initial Step with a Jump (or Loop)

The bottom transition of an SFC chart can be connected to any other step.
Right-click the bottom transition, and select Connections - Add Connection from the
pop-up menu.
Note: You can also right-click a transition, select Connections - Add Jump from the pop-up
The Add Connection dialog will be displayed.
7
8
Note: For a loop connection, remove the check from Draw Connection as Jump checkbox.
Changing a Loop to a Jump
A loop can be changed to a jump.
1
84
menu, and drag the connection to the jump destination step to establish a connection.
On the Add Connection dialog, select the destination step element.
Check the Draw Connection as Jump checkbox and click OK.
Right-click a loop transition, and select Connections - Draw Connection From
Transition as Jump from the pop-up menu.
Section 3-2