Table of Contents
Advertisement
Operations
Step 7: Actual Operation
1, 2, 3...
1-8
Operations
1-8-1 Creating Function Blocks
Item
Creating a new Project Workspace
Registering function blocks
Creating software connection between function
blocks
Settings ITEMs
Registering
Registering
elements in the
from the User
user link table
Link Table
Editing Screen
Editing Screen
Creating software links by
pasting user link tables in a
block diagram
44
1. Make any necessary settings and adjustments such as PID tuning with the
CX-Process Tool, SCADA software, the CX-Process Monitor, or the CX-
Process Monitor Plus.
2. Monitor the PV and all alarms from SCADA software, the CX-Process Moni-
tor, or the CX-Process Monitor Plus.
Note The CX-Process Monitor can be used for the Loop Control Units only.
It cannot be used for the LCBjjs.
New from the File Menu
1.
Select the function block group folder.
2.
Select Insert – Insert Function Block from the
Settings Menu, or
right-click on the block diagram and select
Register – Field Terminal/Sequence
Control/Control Block.
1.
Select the folder for block diagram 1.
2.
Select Edit – Block Diagram from the Settings
Menu.
3.
Select the function block to be pasted.
4.
Click the right mouse button at the pasting
position. Select Paste Function Block from the
pop-up menu.
5.
Select the block and change the position.
6.
Click the start point of the connection and
double-click the end point.
1.
Double-click the function block registered on the
Project Workspace Screen.
2.
Double-click each ITEM.
3.
Set the data in the Setting Dialog Box.
Registering
1.
Select Edit – User Link Table from the Settings
elements
Menu.
individually
2.
Right-click and select Register.
Registering
1.
Select Edit – User Link Table from the Settings
elements in
Menu.
groups with
2.
Right-click and select Block Set.
same tag
name and
serial numbers
(CX-Process
Tool Ver. 3.2 or
higher)
1.
Right-click and select Register – User Link Table
– Link input (Read from CPU Memory) or select
Register – User Link Table – Link output (Write
to CPU Memory) from the pop-up menu.
2.
Right-click and select Register – User Link Table
– Register Block Cell and then select a tag or
input a new tag.
3.
Software link.
Menu item
Section
1-8
Section
3-1-3
3-1-6
3-1-8
3-1-9
3-5-2
3-5-2
Advertisement
Chapters
Table of Contents
