Monitor The Status; Set Serial Communications Settings; Set Network Communications Parameters; Execute Virtual External Input - Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual

Operation List Arranged by Purpose

1-5-4 Monitor the Status

Objective
Display messages
Display alarms
Display cycle time details
Display each status of the task

1-5-5 Set Serial Communications Settings

Objective
Set Serial Communications set-
tings
Disable Serial Communications
commands
Display the content of output by the
Serial Communications commands
Use an actual RS-232C port on the
computer for Serial Communica-
tions

1-5-6 Set Network Communications Parameters

Objective
Set network communications pa-
rameters
Change the node number of the
network communications unit
Disable network communications
commands
Display the content of output by
network communications com-
mands
Issue a network communications
command to the designated node
in the computer

1-5-7 Execute Virtual External Input

Objective
Set a program area for debugging
Invoke data for data replay from a
file
Set a command log
Start a command log
Exit a command log
Display command log data
Set I/O Condition
Execute I/O Condition
Menu or Button to select
System Status | Message Display
System Status | Alarm Display
System Status | Detail
Debug Console | Task Control
Menu or Button to select
System Status | Set | Double-click the port used for Serial Com-
munications.
In the above operation, set [− (Non)] to the Communications Set-
tings. (default)
In the above operation, set [Message] to the Communications Set-
tings.
In the above operation, set [Actual Communications] to the Com-
munications Settings.
Menu or Button to select
System Status | Set | Double-click the unit used for network com-
munications
In the above operation, change the value of FINS node address.
In the above operation, set [− (Non)] to the Communications Set-
tings. (default)
In the above operation, set [Message] to the Communications Set-
tings.
In the above operation, set [Local] to the Communications Settings.
Menu or Button to select
System Status | Set | UM Setting
Debug Console | Replay Menu | Data Replay
Debug Console | Replay Menu | Command Log | set
Debug Console | Replay Menu | Command Log | Start
Debug Console | Replay Menu | Command Log | Stop
Debug Console | Replay Menu | Command Log | View Log
Debug Console | Replay Menu | I/O Condition | File Menu | Set
Debug Console | Replay Menu | I/O Condition | Start
Section 1-5
17