Setting First Slot Words - Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual

Cs1d duplex system

Table of Contents

Allocating First Words to Slots (Single CPU Systems Only)

Group 00 set for first

slot word of CIO 0000

Rack number 0

Rack number 1

Rack number 2

Rack number 3

Setting First Slot Words from the CX-Programmer

Example: Setting the First Words for Racks

In this example, a first slot word has been set in the middle of each Rack. For

simplicity, only 16-bit Units have been used.

Group 01 set for first

slot word of CIO 0200

Group 03 set for first

Group 05 set for first

slot word of CIO 0500

slot word of CIO 0600

First Slot Word Settings

00 (See note.)

Note Group 00 must start at slot 00 on the CPU Rack. Any word can be set. Any

slot can be set on any Rack for groups 01 to 63.

First slot words can be set from the CX-Programmer. These settings are not

possible from a Programming Console.

1. Select the Rack/Slot Start Addresses from the Option Menu on the I/O

Table Window. The following dialog box will be displayed.

Group 02 set for first slot word of CIO 0200

Group 04 set for first slot word of CIO 0300

CS1D Expansion Rack

Chapters

Table of Contents