File Memory; Dimensions - Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual

Cs1d duplex system

Table of Contents

File Memory

PROGRAMMABLE CONTROLLER

For CS1D CPU Units, the Memory Card and a specified part of the EM Area

can be used to store files. All user programs, the I/O Memory Area, and the

Parameter Area can be stored as files.

(See note 3.)

EM file memory

1. A Memory Card can be written up to approximately 100,000 times. (Each

write operation to the Memory Card must be counted regardless of the size

of the write.) Be particularly careful not to exceed the service life of the

Memory Card when writing to it from the ladder program.

2. The HMC-AP001 Memory Card Adapter is shown below.

3. For precautions regarding the use of Memory Cards, refer to 5-1 File Mem-

ory in the SYSMAC CS/CJ/NSJ Series Programmable Controllers Pro-

gramming Manual (W394).

Memory capacity

The maximum capac-

ity of the CPU Unit's

EM Area (e.g., the

maximum capacity for

(Backplane) 22.3

The specified bank

(set in the PLC Setup)

to the last bank of the

EM Area in the I/O

Table of Contents