Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 553

Auxiliary Area Allocations
Address Name
Words Bits
A320 Error Power Supply Unit Location
When the voltage on the primary side of the Power Supply Unit drops or is interrupted, one of the following bits will turn ON to
show the location of the Power Supply Unit with the error. A31602 (Duplex Power Supply Unit Error Flag) can be used to deter-
mine if there is an error and the following bits can be used to locate the error.
A32000 Right Power Supply Unit on CPU Rack (Rack 0)
A32001 Left Power Supply Unit on CPU Rack (Rack 0)
A32002 Right Power Supply Unit on CPU Rack (Rack 1)
A32003 Left Power Supply Unit on CPU Rack (Rack 1)
A32004 Right Power Supply Unit on CPU Rack (Rack 2)
A32005 Left Power Supply Unit on CPU Rack (Rack 2)
A32006 Right Power Supply Unit on CPU Rack (Rack 3)
A32007 Left Power Supply Unit on CPU Rack (Rack 3)
A32008 Right Power Supply Unit on CPU Rack (Rack 4)
A32009 Left Power Supply Unit on CPU Rack (Rack 4)
A32010 Right Power Supply Unit on CPU Rack (Rack 5)
A32011 Left Power Supply Unit on CPU Rack (Rack 5)
A32012 Right Power Supply Unit on CPU Rack (Rack 6)
A32013 Left Power Supply Unit on CPU Rack (Rack 6)
A32014 Right Power Supply Unit on CPU Rack (Rack 7)
A32015 Left Power Supply Unit on CPU Rack (Rack 7)
A322 CPU Standby Information
A32203 CPU Bus/
Special I/O
Unit Star-
tup Flag
A32204 Duplex
Bus Error
Standby
Flag
A32205 Duplex
Verifica-
tion Error
Standby
Flag
A32206 Waiting for
Other CPU
Unit
Standby
Flag
A32207 Inner
Board
Startup
Flag
A32208 Expan-
sion Power
OFF
Standby
Flag
A324 A32406 Inner
Board
Error
A32407
Flags
(Non-fatal
error)
(Duplex
CPU Sys-
tem only)
A32411 Right/Left
CPU Unit
Battery
A32413
Error
Flags
(Duplex
CPU Sys-
tem only)
Function
ON: The CPU Unit is on standby
waiting for CPU Bus or Special I/O
Units to start.
ON: The CPU Unit is on standby
because a duplex bus error occurred
at startup. (Duplex CPU System
only)
ON: The CPU Unit is on standby
because a duplex verification error
occurred at startup. (Duplex CPU
System only)
ON: The CPU Unit is on standby
waiting for the other CPU Unit to
start operation at startup. (Duplex
CPU System only)
ON: The CPU Unit is on standby
waiting for an Inner Board to start.
(Single CPU Systems or Process-
control CPU Units only)
ON: The CPU Unit is on standby
because power is not being supplied
to an Expansion Rack.
ON if A40208 turns ON for the right
Inner Board.
ON if A40208 turns ON for the left
Inner Board.
ON if A40204 is ON in the right CPU
Unit.
ON if A40204 is ON in the left CPU
Unit.
Settings Status
after
mode
change
ON: Primary- Cleared
side input power
error
OFF: Normal
ON: Standby Held
OFF: Other
ON: Non-fatal Cleared
Inner Board
Error
OFF: Normal
ON: Battery Cleared
error
OFF: Normal
Appendix B
Status at Timing Related
startup flags,
settings
Cleared When A31602
error
occurs
Cleared When ---
CPU Unit
goes on
standby
Cleared When A402
error
occurs
Cleared When A402
error
occurs
A402
517