Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 261

I/O Allocations
I/O Table Creation with a Programming Console
Creating I/O Tables without Mounted Units
I/O Table Creation with CX-Programmer
Use the following procedure to register the I/O table with a Programming Con-
sole.
FUN SHIFT
Note If the Rack first words have already been set from the CX-Program-
mer, "Rack 1st Word En" will be displayed on the second line.
9 7 1
0
With the CX-Programmer, I/O tables can be created offline without mounted
Units and then transferred to the CPU Unit. The information on Unit models
and mounting locations are written to the parameter area of the CPU Unit as
the registered I/O tables.
CX-Programmer
Edit I/O tables and then transfer
them to the CPU Unit.
Edited I/O tables transferred.
Active CPU Unit
Use the following procedure to create the I/O tables offline with the CX-Pro-
grammer and then transfer them to the CPU Unit. Once the Units that are to
000000 CT00
CLR
000000 I/O TBL ?
CH
*DM
000000 I/O TBL
CHG
WRIT
000000 I/O TBL
3
WRIT
000000CPU BU ST?
WRITE
0:CLR 1:KEEP
000000 I/O TBL
1
WRIT OK
000000 CT00
CLR
Offline
Unit models and locations
(Registered I/O Tables)
CPU Rack Unit model
00 Unit xx
Unit xx
01
Unit xx
02
I/O tables written to parameter
area in CPU Unit.
Standby CPU Unit
Section 7-1
????
9713
225