Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 267

I/O Allocation Methods
I/O Table Editing Operation
Double-click IO Table in the project tree in the main window. The I/O Table
Window will be displayed.
• CX-Programmer Ver. 5.0 or Earlier
Right-click the slot for which a word is to be reserved and select the
Dummy item from under the Basic I/O Unit with the correct number of I/O
points.
• CX-Programmer Ver. 6.0 or Later
Right-click the slot for which a word is to be reserved and select Add Unit
(alternatively, double-click the empty slot).
Section 7-2
231