Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 466

Replacing User-serviceable Parts
430
3. Remove the old battery from the compartment, but leave its connector con-
nected.
4. Insert the new battery into the battery compartment with the cable and
connector facing outward.
Battery compartment
5. With the old battery connected, insert the new battery's connector in the
open connector in the CPU Unit. Be sure that the connector is inserted so
that its red wire is at the top and the white wire is at the bottom.
Old battery
New battery
Old battery
New battery
Old battery
Old battery
Section 11-2
Leave connected.
Old battery
New battery