Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 177

Basic Procedures
7. Registering the I/O Tables in the CPU Unit
Using a Programming Console
PRO27 PR O27
PROGRAMMING CONSOLE PR OGRAMMING CONSOLE
MONITOR
RUN PROGRAM
Procedure
Specifying a word address in the PLC Setup.
(Example: 209)
2
Example: Input 8064.
8 0 6
Address Bits
95 00 to 14
121 00 to 15
123 15
127 00 to 15
Note Supported for CPU Unit Ver. 1.1 or later.
Registering the I/O tables allocates I/O memory to the Units actually installed
in the PLC. This operation is required in CS-series PLCs.
000000 CT00
CLR
PC SETUP
FUN VRFY
0:MODE1:PC SETUP
PC SETUP
1
+000 0000
PC SETUP
9
0
+209
PC SETUP
+209
or
PC SETUP?
CHG
+209
4
WRITE
PC SETUP
+209 8064
Setting
Communications Unit
Duplex Settings for
primary/secondary
communications (See
note.)
Communications Unit
Duplex Settings for
active/standby com-
munications
Automatic Duplex
Operation Recovery
Standby CPU Unit
RS-232C Port Setting
Section 4-2
0000
0000 0000
Description
ON: Enable
OFF: Disable
ON: Enable
OFF: Disable
ON: Automatic recovery
OFF: No automatic recovery
0000 hex: Do not use independently.
5AA5 hex: Enable independent moni-
toring.
141