Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 272

Cs1d duplex system

Table of Contents

Allocating First Words to Racks

Setting First Rack Words from the CX-Programmer

Confirming First Rack Word Settings on a Programming Console

specified first words. The non-shaded Racks are allocated in order from left to

right and in order of Rack starting from CIO 0000.

The first word allocated on each Rack can be set from the CX-Programmer.

These settings are not possible from a Programming Console.

Note For CS1-H CPU Units, an indication of whether or not the first rack words

have been set will be displayed on a Programming Console.

Use the following procedure to set the first rack words.

1. Select the Rack/Slot Start Addresses from the Option Menu on the I/O

Table Window. The following dialog box will be displayed.

2. Select the Rack Start Addresses Settings Option and click the OK Button.

3. In the dialog box that will appear, remove the checkmarks from the settings

disabling the first rack word settings and set the address of the first words

for the CPU Rack and Expansion Racks (1 to 7).

Rack Start Address

4. Click the OK Button.

Note Up to 8 Racks can be set for any CPU Unit model.

With a CS1-H CPU Unit, the Programming Console can be used to check

whether or not the first word has been set on a Rack. Use the following proce-

1. Press the FUN, SHIFT, and CH Keys to start the I/O table creation opera-

tion. If the first work for a Rack has been set, a message saying so will ap-

pear on the second line of the display.

Setting range

Selected or cleared Selected (invalid)

Same for all Racks

Chapters

Table of Contents