Table of Contents
Advertisement
Function
New Appli-
MILH, MILR, MILC
cation
=DT, <>DT, <DT, <=DT, >DT,
Instruc-
>=DT
tions
BCMP2
GRY
TPO
DSW, TKY, HKY, MTR, 7SEG ---
EXPLT, EGATR, ESATR,
ECHRD, ECHWR
Reading/Writing CPU Bus
Units with IORD/IOWR
Instructions
Unit Versions and Programming Devices
x
Duplex CPU, Single I/O Expansion
Pre-Ver.
1.1
---
---
---
---
---
---
---
Note
1. OK: Supported, ---: Not supported
2. The Removal/Addition of Units without a Programming Device function is
supported only by CS1D CPU Units with unit version 1.3 or later and a Du-
plex CPU, Dual I/O Expansion System.
If the Removal/Addition of Units without a Programming Device function is
selected in a Duplex CPU, Single I/O Expansion System, the function will
operate as the earlier Unit Removal without a Programming Device func-
tion.
3. Basic I/O Units and Special I/O Units can be added for the Online Addition
of Units and Backplanes function. CPU Units cannot be added.
4. Expansion Backplanes cannot be added with a Duplex CPU, Single I/O Ex-
pansion System.
CX-Programmer version 7.0 or higher is required to use the functions added
to the CS1D-CPU@@H CPU Units in unit version 1.3 (Duplex CPU Systems).
CX-Programmer version 4.0 or higher is required to use the functions added
to the CS1D-CPU@@S CPU Units in unit version 2.0 (Single CPU Systems).
The following tables show the relationship between unit versions and CX-Pro-
grammer versions.
CS1D-CPU@@H
System
Ver. 1.1 Ver. 1.2 Ver. 1.3
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
CS1D-CPU@@S
Duplex CPU,
CS1D CPU Units
Dual I/O Expan-
for Single CPU
sion System
Systems
Ver. 1.3
Ver. 2.0
---
OK
---
OK
---
OK
---
OK
---
OK
---
OK
---
OK
---
OK
Advertisement
Chapters
Table of Contents
Troubleshooting
