Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 47

System Configuration
Name
Expansion Backplane Sup-
porting Online Replacement
(Especially for a Duplex CPU,
Dual I/O Expansion System)
CS1D I/O Interface Unit
(Especially for a Duplex CPU,
Dual I/O Expansion System)
CS1D-IC102D I/O Control Units
(See note.)
CS1D-BC042D CPU
Backplane (see note) for
Duplex CPU Systems
CS1W-CN@@3
CS1 Connecting Cables
CS1D-BI082D Expansion Backplane
supporting online addition/removal
(See note.)
12 m max.
CS1W-CN@@3
CS1D-BI082D
Model number
CS1D-BI082D This Expansion Backplane is used in a Duplex CPU System, Dual
I/O Expansion System. It allows the mounting of Duplex Power Sup-
ply Units and Duplex Communications Units, as well as online Unit
replacement and online addition of Units and Backplanes.
This Backplane cannot be used in a Duplex CPU, Single I/O Expan-
sion System or Single CPU System.
This Backplane cannot be used for a Long-distance Expansion
Rack.
CS1D-II102D These Units are required to create a Duplex CPU, Dual I/O Expan-
sion System. The Connecting Cables can be duplexed by using two
of these Units.
These I/O Control Units cannot be used in a Duplex CPU, Single I/O
Expansion System or Single CPU System.
CS1D-DPL02D
Duplex Unit
(See note.)
CS1D-II102D
I/O Interface Units
(See note.)
Note These Units are for use in a Duplex CPU, Dual I/O Expansion System only.
CS1D-CPU@@H/P CPU Units
for Duplex CPU Systems
(unit version 1.3 or later)
Up to 3 Units can be mounted.
CS1 Basic I/O Units
CS1 Special I/O Units and
CPU Bus Units
Note: C200H Units cannot be
mounted.
Up to 7 Units can be mounted.
CS1 Basic I/O Units
CS1 Special I/O Units and CPU Bus
Units
Note: C200H Units cannot be mounted.
Section 1-2
Contents
CS1D CPU Rack
CS1D-PA/PD@@@@
Power Supply Units
CS1D
Expansion
Rack
Up to 7 Racks total
CS1D
Expansion
Rack
CS1D
Expansion
Rack
CS1D
Expansion
Rack
CS1D-PA/PD@@@@
Power Supply Units
11